220
HP ProLiant DL380 Generation 4 Server Reference and Troubleshooting Guide
Wrong Accelerator
Description: This may mean that the board was replaced in the wrong slot or
was placed in a system previously configured with another board type. Included
with this message is a message indicating (1) the type of adapter sensed by ADU,
and (2) the type of adapter last configured in EISA NVRAM.
POST Error Messages and Beep Codes
Action: Check the diagnosis screen for other error messages. Run the server
setup utility to update the system configuration.
List of Messages:
200 Series ...................................................................................................................................
400 Series ...................................................................................................................................
600 Series ...................................................................................................................................
1100 Series .................................................................................................................................
1600 Series .................................................................................................................................
Introduction to POST Error Messages
HP ProLiant BL servers do not have speakers and thus do not support audio
output. Disregard the audible beeps information if the server falls into this
category.
IMPORTANT: This guide provides information for multiple servers.
Some information may not apply to the server you are troubleshooting.
Refer to the server documentation for information on procedures,
hardware options, software tools, and operating systems supported by
the server.
