Hardware Options Installation
75
WARNING: To reduce the risk of personal injury from hot
surfaces, allow the power supply or power supply blank to cool
before touching it.
4. Slide the power supply into the power supply bay.
5. Connect the power cord to the power supply.
6. Route the power cord through the cable management arm or power cord
anchor.
NOTE: If using the power cord anchor, be sure to leave enough slack
in the power cord so that the redundant power supply can be removed
without disconnecting the power cord from the primary power supply.
7. Reposition the cable management arm into the operating position.
8. Connect the power cord to the power source.
9. Be sure that the power supply LED is green.
10. Be sure that the front panel external health LED is green ("Front Panel LEDs
Expansion Board Options
The server supports PCI, PCI-X, and PCI Express expansion boards. PCI hot-
plug capability is available on some expansion slots.
